MICE Scintillating Fibre Tracker 

Publications

• NIM

MICE-NOTE

• 0143: Bench test of TRIP-t

• 0142: D-Zero Central Fiber Tracker Analog Front End Board, Revision 2 (AFE II) Design Specification

• 0141: Mechanical Drawing Set for MICE VLPC Cryostats

• 0140: VME LVDS SERDES Buffer (VLSB)

• 0139: MICE Tracker Data Acquisition Using D0 Analog Front End IIt Boards

• 0138: MICE VLPC Cryostat Safety Engineering Document

• 0136: Final Design Report for the MICE 2 slot VLPC Cryocooler Cryostat

• 0135: Specification of the scintillating and clear fibre for the MICE scintillating fibre trackers

• 0127: Procedure for laying out MICE detector planes

• 0120: Vacuum tests on samples of scintillating-fibre doublet layer

• 0096: Commissioning Report for the MICE 2 slot VLPC Cryocooler Cryostat

• 0090: MICE Scintillating Fibre Tracker Prototype

• 0089: Dehydration of the scintillating fibres and the force exerted on the carbon fibre station

• 0052: Tracker Choice: Ground Rules and Process

• 0038: Tracker Choice: Ground Rules and Process (Draft)

Technical Reference Document

• Tracker part

Talks

• CM15

• Cryo status: Russ Rucinski

• Electronics: Terry Hart

• Station 5: Takashi Matsushita

• Fiber Mirroring: Eileen Hahn

• Simulation (Air, Spacing): Takashi Matsushita

• KEK Analysis: Hideyuki Sakamoto

• KEK Analysis: Aron Fish

• KEK Analysis Report: Makoto Yoshida

• Tracker QA Status: Maiko Takahashi for Paul Kyberd

• Tracker Integration: Takashi Matsushita for Geoff Barber

• Review 2006-04-21

• Engineering (mechanical): Takashi Matsushita

• Cryogenic system: Alan Bross

• Electronics and DAQ: Alan Bross

• QA and QC procedures: Paul Kyberd

• Software: Malcolm Ellis

• Performance: Hideyuki Sakamoto

• Schedule, resources and risks: Ken Long

• WS7

• Tracker Update: Geoff Barber

• Connection Mapping for the Final Mice Trackers: Geoff Barber

• QA: Paul Kyberd

• KEK Beam Test Analysis Update: Hideyuki Sakamoto

• Tracker Window & Diffuser Radius vs Scraping Aperture: Chris Rogers

• He/Vacuum window: Wing Lau

• Tracker study - Station spacing and effect of He: Takashi Matsushita

• Cryo and AFE IIt Update: Alan Bross

• CM14

• KEK test beam - KEK-PS T585 -: Makoto Yoshida

• KEK Beam Test Analysis: Hideyuki Sakamoto

• KEK analysis 2: Atsushi Horikoshi

• Status of G4MICE work on the KEK data: Malcolm Ellis

• Light Loss Investigation: Aron Fish

• Tracker Simulation: Takashi Matsushita

• Tracker QA: Paul Kyberd

• Tracker Update: Geoff Barber

• MICE/AFE IIt Update: Terry Hart

• Cryo and AFE IIt Update: Alan Bross

• TRD/Audit sheet status: Takashi Matsushita

• Tracker Update: Geoff Barber

• KEK test-beam analysis - KEK-PS T585 -: Makoto Yoshida

• MICE Tracker DAQ/Electronics Status: Terry Hart

• Light-loss investigation: Ken Long

• Tracker plans: Ken Long

• CM13

• KEK Beam Test for MICE SciFi Tracker - KEK-PS T585 -: Makoto Yoshida

• Tracker, fabrication plans: Ken Long

• Cryo and AFE IIt Update: Alan Bross

• Tracking Analysis for beam test T585: Hideyuki Sakamoto

• Report of the TOF & ACC performance: Atsushi Horikoshi

• KEK test beam - introduction -: Makoto Yoshida

• WS6

• Analysis code for KEK Test-Beam: Malcolm Ellis

• KEK Test Beam Phase II Plan: Makoto Yoshida

• KEK TB Phase II setup status: Alan Bross

• KEK Test Beam Phase I: Makoto Yoshida

• VLPC system and Cosmic Ray test results: Malcolm Ellis

• CM12

• Tracker Software Status: Malcolm Ellis

• Tracker DAQ: Makoto Yoshida

• KEK test overview: Koji Yoshimura

• KEK Test Step2: Koji Yoshimura

• KEK beam test in May 2005: Makoto Yoshida

• MICE Tracker Electronics Update: Alan Bross

• Tracker Status: Geoff Barber

• WS5

• SciFi Tracker Waveguide: Makoto Yoshida

• Station fabrication status: Geoff Barber

• G4MICE: Malcolm Ellis

• G4beamline for KEK test: Katsuya Yonehara

• VME readout for TOF: Paul Soler

• SciFi Tracker Online Display: Makoto Yoshida

• Unix-based Data Acquisition system - UNIDAQ: Akira Sato

• SciFi Tracker Trigger Scheme: Makoto Yoshida

• SciFi Tracker DAQ: Makoto Yoshida

• AFEII board: Paul Rubinov

• 2 slot cryostat status: Russ Rucinski

• Available thin solenoids with dimensions of about 1m phi x 1m L with field about 1 tesla: Y Makida

• Beam Counters: Alan Bross

• Report of the ACC Performance and Beam Survey in KEK beam test: Kenichi Sakai

• Prototype TOF test for tracker test @ KEK: Atsushi Horikoshi

• TOF/ACC test Overview: Makoto Yoshida

• KEK Test Overview: Koji Yoshimura

• CM11

• SciFi Tracker Summary: Makoto Yoshida

• SciFi Performance: Malcolm Ellis

• Actions towards finalisation of tracker design: Ken Long

• MICE Tracker Readout Status: Alan Bross

• Tracker Progress: Geoff Barber

• Discussion: Ken Long

• Simulation for KEK beam test: Katsuya Yonehara

• SciFi Tracker DAQ: Makoto Yoshida

• Trip-t & AFEII status: Paul Rubinov

• TOF ACC estimation test for Beam Test @KEK: Atsushi Horikoshi

• Waveguides: Makoto Yoshida

• KEK Test Beam - Tracker Progress: Geoff Barber

• ACC Performance Test & Beam Line Study: Kenichi Sakai

• KEK Beam Test: Koji Yoshimura

• CM10

• Tracking Summary: Alan Bross

• DAQ for KEK beam test: Makoto Yoshida

• Tracker Simulation for KEK beam test: Katsuya Yonehara

• Construction/Refurbishment Of The Tracker Prototype: Geoff Barber

• KEK Beam Test: Koji Yoshimura

• AFE II Status: Alan Bross

• SciFi Tracker Performance: Malcolm Ellis

• QA for fibre bundling: Peter Hobson

• Progress On The Design Of The Full Tracker: Geoff Barber

• Summary of final results from MICE note: Makoto Yoshida

• SciFi Tracker Performance: Malcolm Ellis

• WS4

• Emittance Calculation: Chris Rogers

• Simulation Status/Plans: Malcolm Ellis

• AFEII for MICE: Paul Rubinov

• Status of VLPC Cryo-Cooler Cryostat Design: Russ Rucinski

• Ribbons For Station 4: Alan Bross

• Mechanical Update for Tracker workshop: Geoff Barber

• CM9

• Status of VLPC Cryo-Cooler Cryostat Design: Russ Rucinski

• AFE II Status: Alan Bross

• Mechanical design : Geoff Barber

• KEK Beam Test: Koji Yoshimura

• A track model for MICE: Ken Long

• SciFI Simulation Status: Malcolm Ellis

• Prototype Performance in D0 test stand & fibre intrinsic performance with KEK test beam: Makoto Yoshida

• WS3

• Design Discussion of 2 VLPC Cassette Cryo Cooler Cryostat: Russ Rucinski

• DAQ System: Alan Bross

• KEK Beam Test: Koji Yoshimura

• TriP-t & AFEII status: Alan Bross

• Scintillating Fibre Stage: Peter Cooke

• New Ribbons: Alan Bross

• Comment on cosmic-ray results: Akira Sato

• Prototype Performance in D0 test stand: Makoto Yoshida

• KEK beam test: Hideyuki Sakamoto

• CM8

• SciFi Simulation and Reconstruction Status: Malcolm Ellis

• Latest thoughts on Mechanical Design: Geoff Barber

• Scintillating Fibre Cosmic Ray Test Results: Malcolm Ellis

• WS2

• Dimensional stability issues - D0: J. Krider

• Status of Cosmic Analysis: Malcolm Ellis

• Safety and Integration: Alan Bross

• Status of the MICE SciFi Tracker: Malcolm Ellis

• Tracker coordinate system: Ken Long

• Scintillating Fibre Tracker Simulation: Malcolm Ellis

• Fiber Ribbons: Alan Bross

• Developments in Sci-Fi Layout: Geoff Barber

• CM7

• Comparison of tracking capability and systematics: Alain Blondel

• Tracking Noise and Background Capability: Alan Bross

• SciFi Results and Comparison: Malcolm Ellis

• SciFi answers to referees: Ken Long

• Cost and Schedule: Ken Long

• Sci Fi Tracker Simulations: Malcolm Ellis

• Prototype Performance in D0 test stand: Makoto Yoshida

• Measurement of 'intrinsic' properties of scintillating fibres: Hideyuki Sakamoto

• SciFi prototype: Ken Long

• CM6

• SciFi Tracker - SW Status & Plans: Julia Sedgbeer

• Plans for Sci-Fi Prototyping: Geoff Barber

• KEK Test Results/Plans: Akira Sato